BUILD THREAD Project long time coming

[Streetbu]

Holley Sniper EFI 12-306 Holley EFI Fuel Tank Modules - 255 LPH - GM G-Body Vehicles

This in-tank fuel pump module is a high-pressure unit that flows 255 liters per hour (LPH) and is capable of supporting electronic fuel injection (EFI) engines producing up to 550 horsepower. Featuring a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for this...

www.holley.com

 

[Tony1968]

Do yourself a favor and test it before you install it. If at all possible. I believe that's the same one that was bad right outta the box for me.

 

[Streetbu]

Thanks for the heads up. I'll probably get itchy and fire the engine up on the stand for 30 seconds. LOL

 

[Tony1968]

Thanks for the heads up. I'll probably get itchy and fire the engine up on the stand for 30 seconds. LOL

This is something I could never do
I just can't trust running an engine without coolant for any amount of time. That's just me.

 

[fleming442]

This is something I could never do
I just can't trust running an engine without coolant for any amount of time. That's just me.

You'da messed your pants watching my Series 2 run on the garage floor, then. Engine stand, schmengine stand.

 

[Streetbu]

Alternator bracket came today. Nice piece. Highly recommend ICT for parts. Also just found out the wife has covid, and I have the same symptoms she had two days ago. Pretty sure I have it to. Basically a head cold, chills, and I feel foggy. She's better already. Merry Christmas to us. Not how we wanted to spend the first Christmas in our new place. Oh well, could be worse I guess.

 

[Rktpwrd]

Sorry to hear that about your health, hang in there and hope you feel better soon.
Engine’s looking good and coming along nicely!





(Even with the Barney purple block)
😉

 

[Turbolq4]

Good call with the Term. I have a stock ecu and it's a PIA. Between having to spend the money to have the harness cut down or do it yourself, pay for HPT, learn that rediculousness, fuel wash the bottom end because of the huge injectors, and paying two different shops to tune the thing to where it works. I would have been money ahead to start with something more user friendly. I could learn HPtuners but I don't want to dedicate every waking moment of my life to crawling around in that software. And it has kept me from making large changes to my cars setup because of the difficulty in retuning it. My next one will not have a GM ecu.

 

[64nailhead]

Alternator bracket came today. Nice piece. Highly recommend ICT for parts. Also just found out the wife has covid, and I have the same symptoms she had two days ago. Pretty sure I have it to. Basically a head cold, chills, and I feel foggy. She's better already. Merry Christmas to us. Not how we wanted to spend the first Christmas in our new place. Oh well, could be worse I guess.

Other than the cold - I think I've had Covid all of my life if those are the determining symptoms - at least my wife believes I'm in the fog most of the time 😉



And good God man - get a different throttle body on that thing. All of that shiny stuff on there and that throttle body is, mmm..........not matching everything else 🙁

p.s. - I have a Chinesium 92mm one that I received for free that was shipped in error that you could have if you give me $10-15 to get it shipped (I just have to find it lol.) And did you notice I tried to get the font to match the color of your motor? Clever ehh? Get better and enjoy the holiday.

View attachment 165174

 

[Streetbu]

Thanks. Yeah I'm not 100% sure on the throttle body... I don't want to deal with a whistle like Scott did with his aftermarket t-body though...