Project LSX El Camino on www.HotRodRegal.com

[Transformer]

Click the other projects tab and you will find many of the articles on LSX El Camino.
www.hotrodregal.com

here is the latest on the project...
The Dyno Runs for the Project: LSX El Camino are up on the website. Its unbelievable the power this Mast Motorsports LSX small block with a carb. makes!

http://hotrodregal.com/mast-motorsports ... ic-part-4/

 

[Transformer]

LSX EL CAMINO got the first production set of ULTIMATE HEADERS for the G-body (New Product)

http://hotrodregal.com/ultimate-headers ... te-g-body/

 

[Transformer]

we took the LS swap Ultimate Headers for the G-body - built the Flowmaster Stainless Steel exhausts around those - made everything fit nice and tight on the LSX El Camino and the Hot Rod Regal... Then we took everything to NitroPlate for ceramic coating.

http://hotrodregal.com/ceramic-coating-nitroplate/

check out the videos I took of how they do it
pretty cool to see the ceramic coating in raw form and then come out polished.

 

[Transformer]

This Eaton Detroit Truetrac is going in the Hot Rod Regal, but we have a P.E.M. Racing Ford 9" axle housing, third member, and Detroit Truetrac going into the LSX El camino soon
This post has 3 "How To" videos that might help you decide if you want to tackle this upgrade.
Roy Teeter (co-owner of P.E.M. Racing in St. Clair, MO) assembled the third member and Truetrac. Highly recommended company!

see link

http://hotrodregal.com/eaton-detroit-truetrac-install-9-ford-pem-racing/

 

[Transformer]

How about a look at Greg Cragg's LSX El Camino and the Ridetech suspension install part 1
http://hotrodregal.com/lsx-el-camino-riding-ridetech/