I have to replace some of the nuts holding the bumper support to the body. Anyone what size is needed?
Rear bumper stud plate nut size
- Thread starter MechMan
- Start date
So, you're talking about the little plates with the studs on them already? They all use the same plate, but here's an SS rear bumper. Look at part number 9 and 13. M8 x 1.25 flanged nut.
Here's a 11507036 equivalent. If you just have to have GM, good luck. Seen them for around 10 bucks each on average, and you need 8 just for the rear of the car.
It got superseded to GM p/n 11514596 many moons ago.
Here's a 11507036 equivalent. If you just have to have GM, good luck. Seen them for around 10 bucks each on average, and you need 8 just for the rear of the car.
Hex Flange Lock Nut M8-1.25 18mm Diameter - GM: 11507036
Hex Flange Lock Nut M8-1.25 18mm Diameter - GM: 11507036
www.clipsandfasteners.com
It got superseded to GM p/n 11514596 many moons ago.
Last edited:
Any body shop supply will have them...Lawson/Kent, Disco, Auveco, probably even Dorman. Have a drawer full of them at work
Similar threads
