Hello everyone, I'm currently looking for new rims and tires and wanted some advice. I currently have 18 inch chrome IROC replicas that slightly scrape on the frame up front if I turn the wheel completely in both directions. I'm not the biggest fan of the stock rally rims that we have in the garage as a backup, but I can't use those either because the tires are very dry rotted. I was thinking of going with these - https://www.jegs.com/i/OER/691/R4411/10002/-1 , does anyone know if there would be any fitment issues? I assume no because these rims were also used on the Grand National but I wanted to ask anyway.
MONTE CARLO Rim question
- Thread starter jwood1213
- Start date
You'll need a set of 4 rear wheels (0mm) to clear the front. Classic Industries sells them for 1st & 2nd gen F bodies & Regals.
gotcha. Did the regal have a different subframe than the Monte Carlo or do they hit the sway bar?
All frames are pretty much the same for '78-'88 A/G's with the differences be in frame ends. Other than specific RPO options, the suspensions are the same.
Why not just buy the ones made for a Gbody, shop around there is possibly better pricing out there.
Last edited:
Oh I didn't even realize that they existed, thank you lol. I just assumed a gta trans am shared the same size with a gn.
My experience with that offset was that the tire rubbed the frame in the rear.
Similar threads
