I've just tried wrapping up the remote keyless entry install as described here: http://www.montecarloss.com/community/ubbthreads.php?ubb=showflat&Number=975483&page=1
here: http://www.maliburacing.com/forum/viewtopic.php?f=27&t=121855
and here: https://gbodyforum.com/threads/keyless-entry.51076/
I'm not very good at reading wiring diagrams, but when hooking up the tan wire from the rke module to the tan wire for the door lock the driver side doesn't lock or unlock at all. When leaving the tan wire from the rke module disconnected and the factory wires connected how they were originally both doors lock and unlock on the second press of the fob button.
What am I missing? Thanks!
here: http://www.maliburacing.com/forum/viewtopic.php?f=27&t=121855
and here: https://gbodyforum.com/threads/keyless-entry.51076/
I'm not very good at reading wiring diagrams, but when hooking up the tan wire from the rke module to the tan wire for the door lock the driver side doesn't lock or unlock at all. When leaving the tan wire from the rke module disconnected and the factory wires connected how they were originally both doors lock and unlock on the second press of the fob button.
What am I missing? Thanks!