Square body crew

Status
Not open for further replies.
Guys worse comes to worse United Craine is right around the corner from my house. But I got this! Well if the lightning ever stops we're having a hell of a storm today and it's Lauren's actual birthday today she wants us to take her for art supplies
 
Guys worse comes to worse United Craine is right around the corner from my house. But I got this! Well if the lightning ever stops we're having a hell of a storm today and it's Lauren's actual birthday today she wants us to take her for art supplies
So that's where the storms I had this morning went.
 
  • Agree
Reactions: Clutch
Guys worse comes to worse United Craine is right around the corner from my house. But I got this! Well if the lightning ever stops we're having a hell of a storm today and it's Lauren's actual birthday today she wants us to take her for art supplies

So that's where the storms I had this morning went.

send some down here, my grass is getting crunchy......😵
 
I'm calling this a win! After work today I went out back and I was just going to move the rig so I could get the ramps down and slide the engine hoist on the back of the trailer. Well my torches were all ready out there so I figured I'd just notch out the fender braces to clearance the stanchions I made. Before I knew what I had gotten into the brace was notched I had a tire off of the compressor come-alongs and ratchet straps hooked up 7 inch c channel for a pry bar jack stands floor jack. The end result is I moved that big b*tch! It's not in it's final resting place or on the stanchions but it's dam close if I can keep up this pace ilI' be painting it pritty soon!
IMG_20180718_191605.jpg
IMG_20180718_191758.jpg
IMG_20180718_173333116.jpg
IMG_20180718_192302.jpg
I'm hoping to get a lot done on it this week I can't wait to cut off those extremely heavy way overkill ramps but I'm waiting for the new taillight brackets to come first my 12v water pump came today it's 3gpm 40psi it was cheap I just hope it's adequate. The rest of my air fittings should be here Friday so it's all starting to come together
 
I'm calling this a win! After work today I went out back and I was just going to move the rig so I could get the ramps down and slide the engine hoist on the back of the trailer. Well my torches were all ready out there so I figured I'd just notch out the fender braces to clearance the stanchions I made. Before I knew what I had gotten into the brace was notched I had a tire off of the compressor come-alongs and ratchet straps hooked up 7 inch c channel for a pry bar jack stands floor jack. The end result is I moved that big b*tch! It's not in it's final resting place or on the stanchions but it's dam close if I can keep up this pace ilI' be painting it pritty soon!View attachment 92357View attachment 92358 View attachment 92359View attachment 92360 I'm hoping to get a lot done on it this week I can't wait to cut off those extremely heavy way overkill ramps but I'm waiting for the new taillight brackets to come first my 12v water pump came today it's 3gpm 40psi it was cheap I just hope it's adequate. The rest of my air fittings should be here Friday so it's all starting to come together

That is sort of impressive but I am more interested in what you got at the art store...😛
 
  • Like
Reactions: Clutch
She picked out what she wanted mostly colored pencils blendable and another set that is for wet brushing water color and some kind of pens all stuff I never seen before but she knows what she wanted and was very happy

Huh, I always thought colored pencils were colored pencils. You could have her do car sketches for the guys here as a little side hustle.
 
Oh no what happened to my favorite website it's different I'm lost! What are you doing to me! I don't want to figure it out again it took me 10 minutes to figure out how to post this and I'm pretty sure I did it wrong and where are my alerts?
 
  • Like
Reactions: dr78442
Oh no what happened to my favorite website it's different I'm lost! What are you doing to me! I don't want to figure it out again it took me 10 minutes to figure out how to post this and I'm pretty sure I did it wrong and where are my alerts?

who are you????...🤔
 
Last edited:
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor