SS Air Dam Spoiler

[patmckinneyracing]

Does anyone have any pics of how the front air dam mounts on the side fender? Do you use double side tape or an epoxy to get it to form alongside the fender? I know there are the 3 mounting holes on the core support then the mounting screws that mount up on the inner fender lips. I still have a pretty good gap on the driver side.

Thinking it may be the bottom of my fender curving too far inward. This is a stock urethane spoiler, not fiberglass.

 

[tc1959]

Does anyone have any pics of how the front air dam mounts on the side fender? Do you use double side tape or an epoxy to get it to form alongside the fender? I know there are the 3 mounting holes on the core support then the mounting screws that mount up on the inner fender lips. I still have a pretty good gap on the driver side.

Thinking it may be the bottom of my fender curving too far inward. This is a stock urethane spoiler, not fiberglass.

I think they used double sided tape , I used 3M got a roll at Lowe's . Mine also has the side molding I just tucked it under the molding and tightened it down,and trimmed it to fit between the bumper filler and the fender.( mine had a tab that the filler screw would pass through.) I also added a self tapping pan head screw at the top of the air dam,into the fender lip.

 

[MR442]

Screw in the one I painted while back . Was low miles original car