HELP TCC standalone controller (I'm designing) for 200-4R or 700-R4

[78Delta88]

Maybe we get that figured out, then maybe 6L80E?

Wonder what my 83 Regency 98 Sedan with 307 Turbo and 6 speeds could do??

 

[rfpowerdude]

Maybe we get that figured out, then maybe 6L80E?

Wonder what my 83 Regency 98 Sedan with 307 Turbo and 6 speeds could do??

150mph. Then go airborne🤣

 

[78Delta88]

Did that in my TA at 143, not in a hurry to do again.

 

[78Delta88]

This is the shifter I was thinking of. Prices have gone up a bit.

 

[Ernest]

Did that in my TA at 143, not in a hurry to do again.

 

[rfpowerdude]

🤨

 

[78Delta88]

The original from the movie from the creek bridge jump is in Ohio Museum, last I heard.

Maybe I'll get a restored 442 and drive it off a 10 story parking garage? NOT!

If this raised some serious cash for maybe a child's hospital, I'm fine. But wreck a TA like this?

 

[rfpowerdude]

Without even trying to land it well

 

[Sweet_Johnny]

Yep saw what some are doing. I was thinking Lokar with micro switches or similar.

What would be nice is automatic operation but can go manual similar to a regular stick shift, just no need to clutch.

Something like this. Mount micro switches in and around base plate but looks like manual shift, just no clutch peddle.

I've been digging... I'm sure you're better acquainted with it than I am but these give me hope:

Mechanically Control electronic transmission

This is about controlling a 4l60e without a computer and without a full manual valve body conversion. I did this with a '98 and a '95 4l60e. So I started with the notion of needing to swap to an overdrive transmission and I didn't want to pay for an expensive controller since I was short on...

nastyz28.com

Sloppy Mechanics Wiki - 4L80E Cheap stand alone trans controller using 0411 GM engine PCM

EDIT 9/26/16 - Now I have over 400 miles on this stand alone transmission controller. I also recently turned on the torque converter clutch to activate in overdrive. Everything is working perfectly and shifts just like it should. As the subject says. This is for those guys who are running

sites.google.com

TransGo - 46-MOD - Replaces PCS/EPC for high performance vehicles

Great for transplants! Provides a more aggressive and tunable pressure boost curve with engine vacuum instead of vehicle PCM controlling PCS/EPC Solenoid.

transgo.com