TH350 Kickdown Cable Bracket Update 6/19

[mikester]

Picked this bracket up at the speed shop a while ago. Its a Holley bracket. The only one for a TH350 that I found attached at the manifold but I dont think its going to fit the one on the crate motor. I think this is for a 700. Did I get the wrong bracket ? If I did whats everyone using ?

 

[melloelky]

that bracket's for the 700r4/2004r's.that's a good bracket.

 

[mikester]

that bracket's for the 700r4/2004r's.that's a good bracket.

But I have a TH350. Looks like the cables going to be way too long.

 

[James84SS]

I replaced the 305 in my monte with a ZZ4 crate motor and I used the bracket that was on the 305. If someone else here knows the part number for that original bracket thats what worked for me if you can find one.

 

[mikester]

I replaced the 305 in my monte with a ZZ4 crate motor and I used the bracket that was on the 305. If someone else here knows the part number for that original bracket thats what worked for me if you can find one.

What did you bolt it to ? Pictures ?

 

[TURNA]

I have a ton of brackets or you can use the edelbrock one

 

[James84SS]

Bracket matched right up to the bolt hole on the manifold

 

[mikester]

Bracket matched right up to the bolt hole on the manifold


View attachment 147649View attachment 147650

A single bolt holds that to the manifold ? Im sure I could find that bracket at a yard but look at your cable compared to mine. Do you have the kickdown cable on the top or bottom ?

 

[James84SS]

Picture doesnt show it well but the bracket also bolts on with the farthest back silver bolt you can see under the red spark plug wire. The kick down is on the bottom. This whole set up is off of the original 305.

 

[mikester]

Picture doesnt show it well but the bracket also bolts on with the farthest back silver bolt you can see under the red spark plug wire. The kick down is on the bottom. This whole set up is off of the original 305.

I see that now that you mentioned it. I can probably get that bracket at the local yard but if you look at your cable and then check out mine you'll see the ends are completely different. You have a TH350 correct ?