th400 swap

[Billss]

I'm in the middle of the th400 swap from a 200-4r. (I'm tired of wasting time,Money and energy pulling and installing transmissions). Has anyone done this here and are there any pointers?

 

[TURNA]

if you had a 2004r in the car the 400 should go right in

you will need to hook up an electric kickdown switch and a different driveshaft yoke

 

[megaladon6]

i have to ask, what are you doing to the 200? are you running that much power?

 

[nycutlass]

i have never saw a 700 or a 200 TV cable transmission last !!!

 

[megaladon6]

http://www.ckperformance.com/resources/GM2004RCATALOG.html

it's more likely that you haven't seen a properly adjusted TV cable

 

[nycutlass]

a group of us in new york have had different transmission shops install them and still no luck after a year or 2 ..................i guess new york needs your transmission builders here .

 

[TURNA]

Well it took me a while to find someone that could build them.

But when I finally got a properly built 700 it was awesome!

 

[TURNA]

a group of us in new york have had different transmission shops install them and still no luck after a year or 2 ..................i guess new york needs your transmission builders here .

Well I am in NY too Freddie Brown did a great job on mine and that was over 10 years ago and it is still holding up.

And no the engine was not stock , it was far from it.

 

[nycutlass]

a group of us in new york have had different transmission shops install them and still no luck after a year or 2 ..................i guess new york needs your transmission builders here .

Well I am in NY too Freddie Brown did a great job on mine and that was over 10 years ago and it is still holding up.

And no the engine was not stock , it was far from it.

you have the guys # or link .......what hp are you running ?

 

[megaladon6]

ck is in NY, i believe they're on the island. actually they've really expanded so there should be a few places.