Tv bracket for 200r4

A

ArsonSS

Not-quite-so-new-guy
Jul 8, 2011
9
0
1
#1
What’s going on peoples? I recently picked up a 85 Monte Carlo SS with a vortec 350 in it with a 200r4. I need a bracket for the tv cable. Any suggestions?
 

Attachments

g3chevy

g3chevy

Not-quite-so-new-guy
Jan 30, 2019
14
25
3
Spring, Texas
#4
These are the 2 pieces I ended up using on my Camino. Its the Sonnax TV Corrector Plate and the Edelbrock 8036 Throttle Mounting Bracket For S/B Chevy TH350/200R4/700R4. The 8036 bracket needed to be "modified" to get the tension correct on the TV cable. As shown I extended it out using only 1 bolt and drilling a new hole to get it where it needed to be. But after many test runs it shifts perfectly now. I'm not sure if Edelbrock makes a bracket that actually is correct for our applications.

edelbrock-carb-linkage-adapter-jpg.105201

edlelbrock-8036-bracket-jpg.105202

20190130_210951_resized-jpg.105205


20190130_211009_resized-jpg.105204
 

Attachments

g3chevy

g3chevy

Not-quite-so-new-guy
Jan 30, 2019
14
25
3
Spring, Texas
#6
My carb is an Edelbrock 1406 which is virtually the same except for the electric choke.
 
TURNA

TURNA

Geezer
Jul 24, 2009
6,326
8,011
113
Socialist NY
#8
Edelbrock carb bad
 
A

ArsonSS

Not-quite-so-new-guy
Jul 8, 2011
9
0
1
#9
TURNA

TURNA

Geezer
Jul 24, 2009
6,326
8,011
113
Socialist NY
#10
Problem is the carb!!!


:banana:
 

Similar threads

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot Mike's Montes P-S-T Southside Machine Performance UMI Performance

contact [email protected] for info on becoming a sponsor

copyright ©2018 Ripp Technical Services, All Rights Reserved.