What do you guys think of these control arms?

[Nightmare]

http://m.ebay.com/itm/131218936449

have any of you guys used these particular arms?

 

[pontiacgp]

yes and from UB Machine they are under $60...

http://ubmachine.com/uppermetric.html

 

[Kansas Bu Wagon]

Wich would be the best to get for a street car? I have no idea what the offsets are for lol.

 

[Nightmare]

yes and from UB Machine they are under $60...

http://ubmachine.com/uppermetric.html

Thanks for the link. Are those the ones you are running? If so, you like them?

 

[pontiacgp]

those are the ones I have and we used them on the super stocks we ran in circle track racing.....

as for the 1.25" offet that is to counter the angle of the upper control arm brackets ...

these are the ones you want,....14-0809-5R and 14-0809-6L......if you can't get the left (6L) then just get two right sides (5R)

 

[Nightmare]

Used them on a dirt track? Good to hear they can hold up to some abuse.

 

[pontiacgp]

we ran on asphalt...I hate dirt in my beer

 

[Nightmare]

Sorry, misread that.

 

[pontiacgp]

I didn't mention if it was dirt of asphalt s you didn't miss anything. If you have any problems locating the control arms visit your nearest circle track retailer. You'll find the right side with the proper length but they'll only have longer ones for the left side. That is so we could get some positive camber on the left side. For the right we could pull it in with shims. You can buy two right side and flip one over to run on the left. If you do get them change the grease zerks to 90º and point them up. That will make them easier to grease and you'll want to grease them once a month to make them last.