Z06 6-piston calipers?

[CruizinKev]

I just found Z06 calipers and wondering what I need to use them with my 1979 Monte Carlo.

Already looked at kore3 and flynbye but I'm not 100% sure what parts I need.

You could help me with that?

Thanks,
-Kev

 

[79loserbluebu]

Really what you will need is the conversion bracket to bolt to your spindle
http://www.flynbye.com/catalog/i71.html

And then either a set of machined down brake rotors from your car, or a set of these which are really nice
http://www.flynbye.com/catalog/i3.html
Whichever you get, replace the wheel bearings and use a new seal

And then you will need the lines for the Z06 calipers and possibly a couple fittings to adapt the Vette' brake line to your hard line on the frame rail, or you can get a hose I'm sure from flynbye.

And you will also need the rotors, pads, and the pad brackets.

 

[FE3X CLONE]

I don't know about the new 6-piston calipers but on the C5 Z06 2 piston calipers the stock G-body brake lines bolt up.

One thing that wasn't mentioned is you'll need larger diameter wheels and you'll need to double check that the wheel is going to clear the caliper.

I can tell you that American Racing Torque Thrust II's or any variation of them DO NOT clear the C5 13" brake setup.

 

[79loserbluebu]

Yeah I forgot to mention, you'll need at least 18" wheels to clear the calipers. IMO if you are looking into Vette' calipers, I'd go with the C5 Z06.

 

[CruizinKev]

I got 18x8 BOSS 338 rims up front:

looks like I need to get that bracket and the z06 caliper for a test fit?

 

[FE3X CLONE]

You can use this template to test fit. You just have to make sure its printed properly.

http://www.kore3.com/downloads/fitment_ ... OC0019.pdf

You'll notice a monoblock style caliper like this needs a lot more face clearance than a standard caliper.

Also be aware that brake pads for these are expensive. You have 12 individual pads for the front brakes and if you buy a name brand like AC Delco or Raybestos, they're going to be in the $280 range.

 

[CruizinKev]

awesome thx man! I'll try asap :wink:

 

[bapekidon4s]

has anyone done zo6 brakes on a malibu before on here any pics? im thinking about doing it