Search results

great buyer, payed when he said he would, would do business again :D wade

So I am swapping in a new booster but for the life of me I cannot find anyone who sell the gasket that goes inbetween the fire wall and the booster, so far the parts places I called do not even have a description and no part # available. Geez I thought with thousand upon thousand of cars that...

Well I've been trying to trouble shoot my brakes for a while due to alot of pedal travel and I think I have it narrowed down....I hope :D The wagon has new hoses, calipers/pads, drums/shoes/hardware and wheel cylinders, new master cylinder (bench bled on car with kit). Reset prop valve...

Hi guys here's the prob, I changed both the calipers and lines due to one of the bleeder screws being frozen in the caliper, figure go all brand new because one caliper is 25$, any way install everything, gravity bleed the lines, now it feels like the pressure in the system is not backing off. I...

A guy is parting out a 95 s10 blazer 2wd, is this one of the right years for the dual piston front brake swap, if it is looking to get it to be one step closer to having all the parts for 4 wheel disc conversion (have a complete rear set up from 2000 camaro SS). If it's a go then I will...

Just tried to order a set of front and rear edelbrock IAS shocks and they won't ship them to hawaii something with ups regulations on hazmat them being gas filled, now I have to find someone that can bring it in which shouldn't be too hard (local oreilys or napa I think both are edelbrock...

hey guys was working on my wagon today installing the drop springs got one side done before I noticed the upper ball joint looks off, I have spohn lowers and gbodyparts.com uppers both bought 5years ago almost but just installed starting to doubt myself if I have the uppers on correct (right...

Well guys I have great feeling of relief, finally got back to work, I am a union taper and have been out for a year and a half and was down to my last $1000. I start next week, thank the powers that be! wade

If you have the time to do it your self I used this article to do mine, the slop is usually due to the three srews in the column that come loose over time. Hope this helps. I loc tite'd mine so I pretty much never have to worry about it again :lol: wade...

For those following my thread any, you guys know the issue I'm having with my control arm bolts, well the sawzall did not work I dont know what the hell the sleeve inside of the bushings are made of but they eat up sawzall blades made for cutting metal, so next step cutting wheel on a grinder...

http://gbodyforum.com/viewtopic.php?f=14&t=17074 Hi guys I read this thread on the same problem that I'm having now, only thing is I already bought stock replacement precision u joints from summit, and since the new ones are the exact same dimension there is no where to put a clip, where I'm at...

well my moroso axles came in couple of days ago and I just got my screw in studs for them today, just wondering if anyone got a torque spec for these, from some info I found on the net some guys just use loctite and hand tighten them? If it makes a difference the axles are still out of the car...

Sorry steve took a little while to get this done, quick with the cash, good to go on business, let me know how it turns out with the powertrax! wade

Well I slept early last night so I could get an early start on taking out the rear end on my wagon for a gn rear swap wanted to get as much done before the sun started beaming in my garage, but instead my friend calls me and says he needs help loading up and delivering a bunch of stuff that he...

anybody know? will be bolting up the rear in my wagon soon. I found it on a website once but lost it, I think it said the 7.5 took 3.5 bottles and the 8.5 took a full 4? anybody know for sure because I want to fill her up before I jack it up, as it has been my experience that it's a b*tch...

So I figure it's about time so start one, 1979 lemans safari it's been hawaii for only 3 years previous to that it spent its whole life in arizona and it show's it, I would say over %90 rust free with the rest being little surface rust that I can take off with just a Brillo pad if I wanted to...

There's a guy around the corner from my house I am assuming is donating his, been parked in his drive way for many years and now there's a brand new car there, and he put the elco on the curb usually means a tow truck is coming by soon. Man if I had the space, the paint is blown but there's no...

Took too long for me to post this sorry Greg! anyways great transaction went above and beyond to get a grand prix dash shipped to me in Hawaii great communication every step of the way! wade

So I start tearing into my 8.5 rear to change the bearings and seals before I put in my wagon, so I do one side no problem change the seal and the bearing check out the axle all good put in back in, the other side turned out to be not so good the seal was already leaking but in was a different...

So I found a good vid of how to change a pinion seal and marking everything and counting turns to put the pinion nut in the same place, so you don't mess up the crush sleeve. I couldn't find a tutorial on how to replace the axle seals can anyone do me favor and shoot me link? :D 8.5...