87 cutlass supreme original V8... hello everyone just a quick question perhaps someone may have an answer for me. This cutlass was daily driven till yesterday when it started up fine and soon after died and didn’t want to start back up, it just cranks up. Last night it was late to do anything, but I swapped a new ignition module because I thought that was the issue and no it didn’t solve it. This morning I replaced the ignition coil and it started up just fine. I turned on and off a few times with no problems. Two hours later I turned it on and drove it about 50 yards and it cut of running. Of coarse it didn’t want to turn on... back to the drawing board. I went back and exchanged the ignition coil, I put it on and nothing just cranks, no start. I checked for spark NO spark, I replaced the distributor cap because I may or may not broken the brush. My coil comes with the ring connector for the ground, so I don’t need the metal ground strap. I don’t have a volt meter, may get one tonight. However i checked for power with a test light. I’m stunned and tired. I’m thinking of taking back the ignition module and purchasing a new rotor. I have also checked for broken wires. Any help will be appreciated.. the only thing that gets me it’s that it did turn back on with a new coil for a little bit. I hope it’s not the chain. Thanks