Panel bond adhesive

[Ribbedroof]

Duramix was bought by 3M over a decade ago, and they completely changed the product .

Sucks, 'cause Duramix was awesome...3M, not so much.

 

[jlcustomz]

Abs is one of the easiest plastics to glue, not being a slick or oily type plastic. If trying to glue in tabs to inside , as are cast into the fiberglass parts like 565 showed, any multi-purpose 2 part epoxy rated for abs would be fine. Don't remember part #, but home depot sells a self mixing tip epoxy made by Loctite/ Henkel ? 5000 psi rated that I used on metal & plastic mounts to hang heavy 1/2"thick glass doors.
As far as brand names from autobody stores, I found the Finishmaster stores house brand Smart to be as good as 3-m's 8115 for about 25% less cost.

 

[rfpowerdude]

Abs is one of the easiest plastics to glue, not being a slick or oily type plastic. If trying to glue in tabs to inside , as are cast into the fiberglass parts like 565 showed, any multi-purpose 2 part epoxy rated for abs would be fine. Don't remember part #, but home depot sells a self mixing tip epoxy made by Loctite/ Henkel ? 5000 psi rated that I used on metal & plastic mounts to hang heavy 1/2"thick glass doors.
As far as brand names from autobody stores, I found the Finishmaster stores house brand Smart to be as good as 3-m's 8115 for about 25% less cost.

Like this?

Loctite Plastic Bonder 0.85 fl. oz. Epoxy 1360788 - The Home Depot

Loctite Epoxy Plastic Bonder is specially formulated to bond and repair plastic surfaces. The convenient double syringe dispenses equal amounts of each component every time. When mixed in equal volumes,

www.homedepot.com

 

[jlcustomz]

Not the one I was thinking of, which had an automix tip, but I have use those before also. Still holding together a busted mitre saw handle at work shop I fixed several years ago.

 

[rfpowerdude]

I'll go browse the local HomeDepot and see what I come up with...
Thanks all!