I've had this Vulcan welding cabinet for a few years now, and while I like it, it has some down falls. One of my major complaints is storage of filler wire. The holder that they included is designed to hold full length wire in the non-resealable container that it comes in if you pick it up at the weld supply store AND it only holds 4 different tubes.
Not only do I use way more than 4 types of filler wire, but I wanted something that was resealable AND would hold half length filler (my filler ships half length anyhow) to get it out of the way.
I decided to grab some PVC and sheetmetal and see what I could come up with. It doesn't have to be rigid so I didn't go wild reinforcing it. Let me know what you think.
Not only do I use way more than 4 types of filler wire, but I wanted something that was resealable AND would hold half length filler (my filler ships half length anyhow) to get it out of the way.
I decided to grab some PVC and sheetmetal and see what I could come up with. It doesn't have to be rigid so I didn't go wild reinforcing it. Let me know what you think.