Finally getting my car back on the ground and the front sits a bit higher than I expected.
Setup is Belltech drop spindles - Blazer conversion with bolt in hubs, Blazer brakes and such
Moog 5602 springs.
New Moog upper control arms
New Moog (stock) lower ball joint.
235/60r15 tires in front
I've heard that a taller lower ball joint will lower the front about .75". Any compatibility issues with what I have? I read some about it hitting its travel limit and damaging the balljoint, but I'm not sure if that applies to only a taller lower.
Thanks for the help again...if you have recommendations with brand or part numbers let me know.
Setup is Belltech drop spindles - Blazer conversion with bolt in hubs, Blazer brakes and such
Moog 5602 springs.
New Moog upper control arms
New Moog (stock) lower ball joint.
235/60r15 tires in front
I've heard that a taller lower ball joint will lower the front about .75". Any compatibility issues with what I have? I read some about it hitting its travel limit and damaging the balljoint, but I'm not sure if that applies to only a taller lower.
Thanks for the help again...if you have recommendations with brand or part numbers let me know.