OLDS Alternator mount adjustment "anvil"

The part on the left, yes? I'll be at a swap meet this weekend & maybe a junkyard & I'll keep an eye out for it.

That is the junk right there!

If nothing else pans out, I can get dimensions in case anyone dares trying to machine one. I'd probably make it from roundstock if'n it were me, get it milled for the flat spots, then loctite a proper size full-thread bolt into the rear of it then cut off the bolt head.

That's me just thinking out loud.

brrian said:

The part on the left, yes? I'll be at a swap meet this weekend & maybe a junkyard & I'll keep an eye out for it.


View attachment 237382

Click to expand...

That would happen to be Sunday at the Washington Twp VFD on 66?

pagrunt said:

That would happen to be Sunday at the Washington Twp VFD on 66?

Click to expand...

Yes it would!
Jennerstown swap meet is on the 13th by the way. I've never been there, so no idea what to expect.

brrian said:

Yes it would!
Jennerstown swap meet is on the 13th by the way. I've never been there, so no idea what to expect.

Click to expand...

Parking kinda sucks cause you most likely have to park on 66. I've had some good luck & then it was just a morning out. I like it & Jr. usually gets a nice deal on freebies.

pagrunt said:

Parking kinda sucks cause you most likely have to park on 66. I've had some good luck & then it was just a morning out. I like it & Jr. usually gets a nice deal on freebies.

Click to expand...

They stopped letting cars park on 66 - you have to drive up into the field. It was dry in the fall so not a big deal, but if it keeps raining, getting up the hill could get interesting.

brrian said:

They stopped letting cars park on 66 - you have to drive up into the field. It was dry in the fall so not a big deal, but if it keeps raining, getting up the hill could get interesting.

Click to expand...

OK, I missed the fall meet. 4 low & go to get up the hill.

I have one