In addition to this, it also seems that the higher ground clearance most trucks have creates greater air turbulence which scoops up more material off the road to be deposited on the undercarriage.
What did you do to your non g-body project today [2025 edition]
- Thread starter 86LK
- Start date
In addition to this, it also seems that the higher ground clearance most trucks have creates greater air turbulence which scoops up more material off the road to be deposited on the undercarriage.
Sometimes that is the repair… it got my old F150 by for a lot longer than it should’ve.
Bought new dryer today...
Seams electrical industry can't get stuff straight 🤣🤦🏻♂️
Dryer plug is labeled as a 10/3 vs 10/2
The wire I'm running to feed it is 8/2 plugged into a 2pole 30A breaker.
Pending the length I think 10ga is too small for 30a system. Most of the places I've lived dryer is 50' feet straight line from the power panel, probably well over 75' of wire🤦🏻♂️
Seams code went to a 10/3 wires... Maybe they should have jump to a 8/2 from 10/2.. let's add another "ground" vs fixing the problem of small wires🤷🏻♂️
I'm sure there was some lobby money on that rule change
Seams electrical industry can't get stuff straight 🤣🤦🏻♂️
Dryer plug is labeled as a 10/3 vs 10/2
The wire I'm running to feed it is 8/2 plugged into a 2pole 30A breaker.
Pending the length I think 10ga is too small for 30a system. Most of the places I've lived dryer is 50' feet straight line from the power panel, probably well over 75' of wire🤦🏻♂️
Seams code went to a 10/3 wires... Maybe they should have jump to a 8/2 from 10/2.. let's add another "ground" vs fixing the problem of small wires🤷🏻♂️
I'm sure there was some lobby money on that rule change
Attachments
Siphoned gas out of it with a drill battery.
drove clients in the limo and made money
then I tried to decode Mercedes documentation to determine what kind of oil I need to top off when it gets low. this thing has oil changes every 20,000 miles. yep, 20K. that's a factory recommendation
then I tried to decode Mercedes documentation to determine what kind of oil I need to top off when it gets low. this thing has oil changes every 20,000 miles. yep, 20K. that's a factory recommendation
Last edited:
Since it was pouring on my way home from Morgantown I figured to pass on Mineral Beach, ended up staying and messing with a few things on the Blazer. A buddy helped me get the overhead console close to wrapped up once I run a wire for the speed sensor and the ambient temp, also stole a display from one of the other junk yard overhead consoles to have that in mine.
Then moved on to figuring the wiring for the door sill plates which is gonna jump from the under dash light
Then since the GTO was the cleaner of the 2 and had a basically full tank she was the runner for the weekend, met up with some buddies to head up to Cars N Coffee
Later that night met up with some more buddies for the opener of the Mosite's meet
Then finally met up with a buddy at another show the next day, drove to another show that we only stayed at for a few minutes because we were hungry so headed out
Then moved on to figuring the wiring for the door sill plates which is gonna jump from the under dash light
Then since the GTO was the cleaner of the 2 and had a basically full tank she was the runner for the weekend, met up with some buddies to head up to Cars N Coffee
Later that night met up with some more buddies for the opener of the Mosite's meet
Then finally met up with a buddy at another show the next day, drove to another show that we only stayed at for a few minutes because we were hungry so headed out
Similar threads
