Search results

I had that problem and replaced mine and it fixed it. A way to test it is unplug the connector from the switch itself and jumper it . It has the a hot , low beam and high beam wires. You can jump the hot to turn on the low or high beam to see if the switch is bad. If it is the switch, I wouldn't...

It's your dimmer switch. It's located on the steering column.

Sounds like it's the dimmer switch. Had the same problem (twice). Not to difficult to replace. It's located on the steering column and mounted with two screws. And a word of advice, you probably shouldn't get one from autozone. Had it on the car for little more than a year and it burned out...

Re: When did they start using double din radio's in Cutlasse Hey 83hurst-olds, Gm changed over to din and a half radios in 1984. They changed harnesses and antennas over in 1988. So you will need a regualar harness for 78-88 and a reverse harness for 88 and up and I think an antenna adapter...

You could run your own wire to a constant hot at the fuse box. You can also check out 12volt.com to get wire colors also.

The orange wire is your 12 volt constant wire.

I have a set in my 79 Monte Carlo and the sound pretty good with my MB quart components. Nothing to move for me other than to bend the parking brake over a bit.

You could tap into the illumination wire. This is a gray wire and you could tap into it at the ashtray light, radio, heater a/c, etc. , any interior light that turns on when you turn your interior lights on.

I purchased some rear frame rails from conrad earlier this year. Turned out pretty good on 79 monte carlo.

no problem.

Yes you can. They make a kit you can buy and the 6x9's will fit in just like the 4x10's.

Those speakers should be bottom mounted so they should just pullout once you remove the brackets.

Does anybody know where I can get my old bumper strips rechromed? Or if they can be rechromed?

Hey 87LS/88SS nice Monte. Looks exactly like mine, without the hydros. Wish I would have known about your strips earlier, would have saved me $150.00! It's exactly the stuff they are selling on e-bay for $200.00. I went to a site called flexchrome.com and I am trying to get a sample of their...

Hey j3 did you hook up your gauges yet? I'm looking for what two terminals on the back of the volt gauge do I hook up the 12v and the ground to. I'm pretty much doing the same thing to my 79 monte carlo and got all the gauges going except the volt gauge.

I have that info, need what the four pins on the back of the volt gauge are. Which is the 12v and which is the ground. thanks

I need help identifying the pins on the back of the volt gauge for a 79 monte carlo cluster. Can anyone help! Someone posted a pic of which pin was what but I can't find it now. Thanks.

I'm looking to change my idiot lights with clock to factory gauges and tach with clock in my 79 monte carlo. Wanted know if anybody else done this and what all is there to do it. I know i'll have to change the oil and temperature senders, but i've been looking around and seen i have change the...