Started on the other head used the carbide burr to get the meet out then started to use the stones and you do feel more in control with the stones.
i am just using a cheep autozone stones & dremel
o boy here we go now ..... :roll: yes the 882 are smog heads but they don't "Suck" what makes them not wanted is the huge 76cc chambers but i dont care i am only sooting for 9~9.5:1 this is not an all out trying to get all the power out of this 350 i have a BBC 396 for that.
Ok to fill you in...
Well i scored a set of 882 heads that where at a shop that a guy had work done but did int want them. so i picked them up for $50 :D they where Cleaned, checked for cracks, had a valve job done, positive valve seals installed new springs and retainers.
so i disassemble them and started to...
that is what i was thinking i may try and see if a shop has some heads they where never payd for and has sat for a year or two.
that is if i cant fined a cheep stock set. that doing need $400 put in to them if thats the case ill just get the darts i listed.
i have called 7 ppl on craigslist...
i am working on an engine to temporary replacethe Big Block in my monte the Big block runs fine but it needs some up grads new aluminum heads and a look over that will take a few years and due to it being 10.25:1 compreshion i dont want to damage it running it with iron heads.
so i traded a...
i am working on a 350 and i am about to install the cam. I have seen this before but would like to post it up for you guys
If you even need to store your engine before you fire it up Read this
http://www.chevelles.com/forums/showthr ... t=red+lube
ok now i am getting pissed! i sent it back aug 17's and i called them last week they didint even start on it!!! :roll:
i try to call them today and got a busy single for 1 hr and gave up!
It kind of stinks. right out of the Box my LM1 was reading the Tune is almost perfect the carb has awesome low end torque. i was pulling out of a Tim Horton's and i dam near did a 90° 4 lane highway :rofl:
Fortunately i am not the kind of person to pass my junk on to someone else. I paid...
just got my New reman Carburetor Edelbrock 650 Thunder AVS. right out of the box it was driving good there was a lean bog in to the Secretary but i was working on adjusting that.
first thing i see is my idle is high or Low when i stop and lights. so on lunch at work i start to look at it. the...
in my 81 i have a bench seat what are my options for a floor shifter.
I can get some F-body seats. what are the tracks to mount the seats on going for?
i know a lot about oil i have been reading it and looking at tests for 4 years now. and i tell every one that asked me what weight oil should i run and i tell them run what ever gives you around 40 lbs +/- 10lbs.
Don't be fooled about the 0w20 it becomes the same thickness when hot as strate...
what is the deal with guy running 20w50~60 weight oil :?:
i under stand that some people like to have their bearings clearances big but does that really justify having maple syrup in there?
i work part time in a auto parts store and i have had a few people stop in to get 50 or 60 weight oil...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.