I’ll start off with a brief introduction and give more information as I go along. I’ve been a member of this site since 2009 when I bought my 88 Cutlass Supreme Classic. At the time it was my daily driver and I was a complete newbie when it came to working on cars so I didn’t do much work to it...
I'm having a problem with my 87 cutlass with the 307 engine. I just replaced the carb with a brand new stock carb and now my check engine light is on and the car will not go over 20 mph . What could be my problem?
So I was trying to fix my ac no blowing out of the vents and now I have another problem, I seem to have a vacuum leak because my check engine light is coming on and the engine stalls out and dies. I guess I didn't put the vacuum lines back in the right place or maybe one is broken but I'm not...
So I am rebuilding my first engine, a 72 olds 350 and right now I'm in this process of preassembly. I just test fitted the cam and spun it around a few times. I spun freely for the most part and then I removed it to check the cam bearings for high spots or scratches. I saw a few scratches and...
What do I have to do to swap my 200-4r to a th350? I know the 200-4r is better but at the moment I don't have the funds to get a upgraded 200-4r. Thanks
I looking to buy some 20 inch iroc rims for my cutlass and I saw a set on ebay. I have never bought any rims before so Im wondering if they will fit. This is the listing for the rims
http://cgi.ebay.com/ebaymotors/20-INCH- ... 4cf94a6130
Also, if they fit what size tire will I need? The...
Im having an issue with some lights on my cutlass. When I turn on all the lights they all come on except the passenger front turn signal lights and the passenger side green turn signal arrow is lit up solid even though I have the turn signal switch in the neutral position. But when I engage...
Hey everybody,
I was wondering how to replace the turn signal lever on my 88 Cutlass. I can use my turn signals but I think the switch is broken because I cant use my windshield wipers. I have the delay wipers but when I turn the piece at the end of the switch for the wipers to come on it...
I have my car disassembled for paint so I cant drive it and will need to put it on a tow dolly to take to the paint shop. Since its a rear wheel drive car I was told that I need to drop the drive shaft. My question is how do I do that? Do I need to have the car in neutral, or park when I remove...
Does the tailight harness have anything to do with the fuel guage? I disconnected the harness because I disassembled the back end of my car for paint and now my fuel guage is reading full and I pretty sure it wasn't full lol.
Im going for the grand national look for my cutlass and im wondering how should I go about blacking out my trim, grills,bumpers,etc?? What should I use??? Im going to use dupont 99k paint to paint my car. Will paint work on the trim or will it just flake off?
Hey guys,
I was looking into getting a stronger 200-4R transmission for my cutlass because Im going to swap out my 307 to an olds 350. So I decided to go with the stage 1 200-4R from extreme automatics. But before I order one I have a question to ask. I have never installed any transmissions...
I got some bucket seats out of a regal today for my cutlass but im having trouble installing them. My cutlass has a 60/40 bench. I took the bracket off my passenger side bench seat and put it on the bucket seat because the bucket seat bracket was messed up. But the bracket wont line up with the...
I was taking the timing chain and the gears off my 72 olds 350 and I used the gear puller to get the crankshaft gear off and when it came off a little rod came off too it was between the crank and the crank gear. Was that supposed to happen or did I mess something up?
Whats up guys, Im getting a 1970 Olds 350 in a couple of weeks for my Cutlass. I started thinking about the parts I wanted to use for it when I came across an edelbrock catalog that I have. I saw the Performer Olds 350 intake (part number 3711) and all the parts that go with it Performer-plus...
What's up everybody. I plan on getting a 72 olds 350 engine and im wondering where can I get a good engine rebuild kit for it. This will be my first engine rebuild.
Whats up everybody, I have a 307 olds with 200-4r trans and I plan to swap the engine out for a 350 olds but I have some questions about this swap. Im kind of a noob when it comes to cars but Im trying to learn so I can build up my car. So instead of searching everywhere for all my questions I...
Im trying to figure out how to disconnect the throttle linkage from the carb. On a stock olds 307. Im trying to fix my intake gasket but right now im stuck here can somebody tell me how to disconnect the linkage? thanks
What's up, I ran into a problem with screwing my ac/heater panel back in place after I changed out my blower switch . When I tried to screw it back in the screws on the left side kept turning and it wouldn't screw in. So I checked it out and come to find out that the screws go into some kind of...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.