Search results

gears Oh what the hell , just go for 4:11's with a 5000 convertor

rear All g-body rears either 7.5 or 8.5 are exactly 52.5" backing plate to backing plate

QJ Nothing like a good running Quadrajet :D

bushings Boxed lowers and dbl. adj. uppers,lemans/tempest rear coils with air bags

bushings No , the stock rubber bushings. That's why it's at 3.5 deg. Poly should be about 2-3, and steel about 1-2 deg.

Ok guys, need some help here. This year I added a rear swaybar and had my pinion angle set to -3.5 degrees. My 60's went from 1.81-1.82, Friday night all 5 runs were 1.74 which I'm pleased with. My question is: With the rear swaybar and loading my pass. airbag with 30lbs., am I binding up the...

mice I think the bounce sheets are the best

Anyone have a seatbelt guide for my driver bucket seat? Thanks

Anyone have a seatbelt guide for my driver bucket seat? Thanks

speed Well when i first got my cutlass I took it to the track,1/8 mile. With the 307 it would go 12.45 :roll: Now with the big block it goes 8.15 :lol: :lol:

rear I've been running my 8.5" on the street & strip for 2 years now with Moser axles, spool and c-clip eliminators and don't have any leaks

reverse light OK, Down on the bottom of the steering column, you'll find a white ,half moon shaped plastic switch with 2 wires on it. That's the reverse light switch. You may have to drop the column cause it's on the top of the column down near the bottom. Cut the wires and splice into them and...

bulb #168 bulb

How come when I open a thread on this website it always goes to the last reply and I have to scroll up to the begining to start?

Ok guys I need a measurement from someone that has an 82-87 cutlass with either a bench or 60/40 seat, since my car is in storage and I can't get at it. I need the height from the center of the floor of the trans tunnel, against the seat, to the top of the seat cushion. Need this for the...

kill switch Mount a switch under your dash somewhere. Run 2 -12 guage wires from it through the firewall and splice them into the power wire that goes to the distributor hot lead . Simple as that. Very useful on a hot day at the races when the motor wants to crank over a little slow. Shut the...

Wheels I also found this out, that Stock 15" GM steel wheels are soooo very hard to find. Don't know why.

Gears I myself went from 3.42's to 3.73's. It helped my 60ft. a tad but did nothing for my E.T.'s

width all g-bodiy rears measure 52 1/2" backing plate to backing plate

vinyl top If you do ever decide to remove the top, you will have to replace the quarter windows with quarter windows from a non-vinyl top car or there will be a gap. Done this 6 times now. Just thought you'd like the info