700R4 with column shifter????'s

[dickeymoore]

So is there a gate on a 1980 non. tilt column shift column?

 

[dickeymoore]

So is there a gate in a 1980 none tilt column shift column

 

[69hurstolds]

So is there a gate in a 1980 none tilt column shift column

76-80 A body non-tilt gate
p/n 7811592

 

[dickeymoore]

So will the overdrive Rod let me get all gears from first to park on a overdrive transmission with a column shifter

 

[69hurstolds]

At this point, hard to tell. According to the fact there's only ONE part number for all column shift automatic column gates, I'd venture to say yes, but I'm not going to go that far. I obviously don't know enough about column shift cars to be of any help.

 

[1bad79]

Just try it if it doesn’t work We’ll help you find the right part

 

[1bad79]

All I can say is unless the house starts on fire I’m not going out side in this heat and humidity not even to look at car parts

 

[dickeymoore]

Okay I will probably just try and install the rod and see what happens

 

[hoffa65]

It should, i did it.
Adjustment is a bit tricky, best i found is to put trans in 4th and put column in D so it engages the detent plate then tighten the backdrive linkage bolt.
OD will be drive, 3rd will be between D&2, 2 will be between 2&1 and 1 will be to the right of 1.
R will be to the right towards N and P will be to the right a bit but should engage the detent in park

 

[dickeymoore]

Ok sounds good