MALIBU 78 Malibu wagon.

[ShuffleWagon]

My build is more street/touring so gusseted OE lowers will do but uppers & lowers might be what happens. The uppers are because of the aggressive drop (need to dial in better angles).

O can remember the company off hand but they make a bolt in kit that seems nice for like what your wanting that would give you alot more support. It's just a plate setup but isn't a bad way to go without having to remove spring perches and so on.

 

[scoti]

O can remember the company off hand but they make a bolt in kit that seems nice for like what your wanting that would give you alot more support. It's just a plate setup but isn't a bad way to go without having to remove spring perches and so on.

Hhmmm..... I haven't seen anything bolt-on that helps cars that are really low w/stock upper mounting point locations. Full replacement chassis or chassis mods are where I've been steered.

I've seen set-ups that offer lower than stock mounting points (on the chassis side). I would need higher mounting point/s chassis side because my upper bars exceed 45° downward angle.

 

[ShuffleWagon]

Hhmmm..... I haven't seen anything bolt-on that helps cars that are really low w/stock upper mounting point locations. Full replacement chassis or chassis mods are where I've been steered.

I've seen set-ups that offer lower than stock mounting points (on the chassis side). I would need higher mounting point/s chassis side because my upper bars exceed 45° downward angle.

Scoti this is the company I was thinking of https://wildridesracecars.com/product/g-body-upper-control-arm-mount/

 

[Sweet_Johnny]

It's beyond my current status, but I looked into these for future mods/builds:

TRZ, Wild Rides, AA, David Lemmond, Merillat Racing, Hammer Concepts, Performance Fab, Innovative Race Craft, and Team Z Motorsports each offer weld-in adjustable torque boxes.

 

[scoti]

I've seen the Wild Rides but it looked like a weld-on piece. My top choice thus far was the Merillat Racing piece (also weld on) but I haven't made the effort to really investigate all sources thoroughly yet. I have some buddy's that have a connection w/Roadster Shop & that is tempting but my brain just can't get past ROI of a purchase like that for a g-body. I'm not in the tax bracket where you don't blink about those type of build choices.