well i heard it would work and it does.
started with 8.8 mustang rear out of 92.
33 spline axles,spool, c-clip elemintor, 410 gears
removed old ford brackets from 8.8
removed old 7.5 pos
meaured old brackets from 7.5 took a long time to make sure i did not damage brackets and spring pad
used same lengths and angles to weld brackets to 8.8
i'm a ok welder i did the welding with .035 flux core
no speical tools needed
used mustang adj upper control arms,stock lower until i buy adj lower,stock g-body lower by the way
well here are pics
hope this will help anbody in future just ask if you have questions.
total cost used 8.8 race preped 400.00
upper adj arms mustang 60.00 used, welding supplies 50.00
took about 5hours with help of 3 good friends
stll working on rims and driveshaft will update in a few weeks
started with 8.8 mustang rear out of 92.
33 spline axles,spool, c-clip elemintor, 410 gears
removed old ford brackets from 8.8
removed old 7.5 pos
meaured old brackets from 7.5 took a long time to make sure i did not damage brackets and spring pad
used same lengths and angles to weld brackets to 8.8
i'm a ok welder i did the welding with .035 flux core
no speical tools needed
used mustang adj upper control arms,stock lower until i buy adj lower,stock g-body lower by the way
well here are pics
hope this will help anbody in future just ask if you have questions.
total cost used 8.8 race preped 400.00
upper adj arms mustang 60.00 used, welding supplies 50.00
took about 5hours with help of 3 good friends
stll working on rims and driveshaft will update in a few weeks