A Qualified Quadrajet Technician in My Area--Van Nuys, CA

[DWCaprice2017]

Hi,
This is Daniel with the '84 Caprice, 305.
If you've seen my other recent posts about the car's rough, slow idle, various members have
pretty much narrowed down the cause to being the Quad and/or a vacuum leak (or several),
with the outside possibility of the issue being the distributor.
I live in the Los Angeles suburb, Van Nuys. Does anyone know of a shop in my area with
a mechanic who knows how to rebuild them AND tune them properly?
Thank you!

 

[69hurstolds]

I'm betting- Likely not. People that know their way around E-jets are far and few between. Good luck, though. If you do find "a good E-jet guy", hold on to him as long as you have your car at least.

 

[86LK]

Cliffs High Performance Quadrajets – Quadrajet Rebuild Kits, Cabruretor Parts, Quadrajet Rebuilding, Quadrajet Parts, Bushing Kits, Carb Tuning

Home | Mountain Man Fuel Systems LLC 479-639-2022 Hackett Arkansas Text or Call

www.mountainmanfuelsystemsllc.com

Sending quadrajet for rebuild to Lars - CorvetteForum - Chevrolet Corvette Forum Discussion

C3 Tech/Performance - Sending quadrajet for rebuild to Lars - Hello. I'm from Norway and have a 1971 corvette c3 454 and need the right carburettor for the car. have found Lars Grimsrud and got in touch with him and will send him a carburettor for rebuild, is there anyone here who has used him...

www.corvetteforum.com

Lars Grimsrud - Wikipedia

en.wikipedia.org

 

[ELCAM]

Home

HONEST & QUALITY REPAIRS DONE HERE. OPEN MONDAY - FRIDAY FROM 8:30AM-5:00PM FOR INQUIRIES(310) [email protected] OUR REPUTATION “California Carburetor and Auto Repair” has been under the same ownership since 1991. We are a full service

califcarb.com

 

[Clone TIE Pilot]

There was Sean Murphy Induction in Long Beach, Ca but it looks he closed down this past spring.

 

[pizza442]

There was Sean Murphy Induction in Long Beach, Ca but it looks he closed down this past spring.

NOOOOOO! Bummer...and he was actually in Huntington Beach, a block from Chip Foose and his other local cronies

 

[Sweet_Johnny]

If you can part with your carb for a bit you may want to send a request to 78delta88 here on the forum, as he does exactly what you're looking for. I have a beautiful Quad from him that I ran momentarily but other issues have prevented permanent installation so far.