Been holding out on you guys

[pencero]

With this parts cutlass I found nearby. Any interest or no? It's an 85 everything works but the exhaust and rear frame rails are a bit rotten. It has a working 307 but cant drive far due to exhaust leak just aft of the manifold.

we are also selling this 600 Benze amg edition v12 with minor front fascia damage and the mercedes badge was stolen. It is currently listed on ebay so I can't agree on any terms outside that for now but it only has a few days to go.

 

[jphillips]

Is that bitchin tag for sale on the cutlass?lol

 

[pencero]

I guess no interest then. The exhaust should be fixed asap and then I can see the true reliability of the engine. It sounds good so I think it's working just fine 🙂

 

[pontiacgp]

how much for the bear?

 

[pencero]

$15 shipped to Canada. / $7 of it towards the dry cleaning bill to get all the asbestos that fell out of the ceiling on him

 

[pencero]

The mercedes didn't sell. If anyone is int just pm me I guess. It is being sold to benefit the rest of the family it was my late grandfather's car.

 

[don4life]

How bad is the frame rusted out?

 

[pencero]

^ if this guy buys the car I will consider selling you the plate but I do like it a lot. It was actually on my 79 mc (I no longer own) at one point a few years ago. It had some minor sentimental value to me 😳

It's not rusted out to answer the question. The rear frame rails may only be held in place because of the aftermarket tow hitch setup, however. They will probably have to go; but if you are making a drag car these are parts you would most likely want to replace for the sake of safety on any original car... regardless of condition..

 

[don4life]

I'd give you like $200 for it I do not see it being worth much more than that

 

[pencero]

I think we could probably both agree that if you don't see it being worth 'much more than that' it most likely is worth at least a little bit more than that 😳 . I just saw someone sell a header panel in worse condition than the one on this car for $200 - on here... I was originally thinking more like 600 but I'll come down to 5 and I'll even drive it up there with no plates just to prove that it went 120 miles up the highway over 60mph without failing structurally b/c I have utter faith that it will roll up there no problem. When I recovered the car it was just going to be for a bunch of parts I wanted off of it but I just don't want to take it apart. Because of the color it looks suspiciously like a stupid rusty POS but when you really start looking around the floor pans do not need to be done yet and the trunk is solid too. I just went for a 15-20 minute drive in it the other day in the middle of the night and it was a lot better than I thought it would be , even on these really bad tires that it's sitting on right now I encountered 0 problems except for the leaking exhaust. Even the power windows work fine, although you would obviously be taking the power window motors out of the doors most likely. All of the parts that are on the verge of becoming terminal in the near future are parts you would HAVE to replace to hit the strip anyway... I think 500 delivered a long way is a very decent offer, but I would have 0 feelings about and understand completely if you decline. It would probably make more sense for you to buy someone's 'project' that has a 350 chevy sitting in it already instead of buying an original car w/ 307 v8 anyway. I have not figured out if this is the 350 trans or a metric but even if it is a 350 trans the 307 will still be in your way the moment you take it out of the car. I could sell the car; or not. Like I said I already have 1. If you're still int lmk b/c I would rather sell it whole than part. If I can't get title to it I will probably be forced to begrudgingly take it apart this fall but I just really dont even want to take this car apart. Would much rather see someone do something cool with it. Ty,

Br