Let's get the Monte out of the garage.
MONTE CARLO "COPO" Monte Carlo SS - Turbosaurus Build (Swinging Dick Racing's c*ck got bent... she bounced a little too high & hard, & came down awkwardly)
- Thread starter motorheadmike
- Start date
- Status
I hear you like my black shaft too.
I heard he likes any nuts he can get his hands on
Fixed the fuel system tonight.
Long story short, I had it set up as a deadhead system and the regulator wouldn't support that configuration. So I redid it to reflect the preferred method.
Hard to believe I used to make technical drawings in an engineering department and this is the kinda crap I doodle up. But, that's how it works.
Long story short, I had it set up as a deadhead system and the regulator wouldn't support that configuration. So I redid it to reflect the preferred method.
Hard to believe I used to make technical drawings in an engineering department and this is the kinda crap I doodle up. But, that's how it works.
LOL - it was just a feed/return issue in the regulator not a fuel leak. I just had to reroute a couple of lines.
It goes from a -10 AN main feed to a Y-block which splits into -6 AN to the rails (back feed), the rails then empty (from the front) via -6 AN into the regulator, and there is a -6 AN return to the tank. Pretty straight forward.
Ya had me right up to here. Why do you need an additional return off the rails? I would think they would deadhead and the regulator would handle return duties.
Figure 2(c) would disagree with both of us.
- Status
Similar threads
