Cutlass Project
- Thread starter fraido2002
- Start date
- Status
Wow! Your build is awesome! 8)
My T-top frame is ate up. You're lucky yours was in that shape. My car is here in the Deep South and my t-top frame will need tons of work.
My T-top frame is ate up. You're lucky yours was in that shape. My car is here in the Deep South and my t-top frame will need tons of work.
Cleaned up my gas and brake pedals. Got all the rust off, primed and painted.
I went to the junkyard the other day just to poke around and brought home some new trunk shocks/springs. Only cost me 25 bucks.
I'm not sure if thats the route I'll go, but now I have the option.
I went to the junkyard the other day just to poke around and brought home some new trunk shocks/springs. Only cost me 25 bucks.
I'm not sure if thats the route I'll go, but now I have the option.
I made it over to my car the other day and put my ac box back in as well as my steering column. Not many updates but hopefully I will have some soon.
Been working on cleaning up and prepping some of the interior. Trying to get as much done as I can so when I the car back, all I have to do it put it together.
Came out great! What do you plan to put behind them before you install them. The wind noise in my T-top is super irritating.fraido2002 said:Been working on cleaning up and prepping some of the interior. Trying to get as much done as I can so when I the car back, all I have to do it put it together.
Well i'm not quite sure what you mean. Most of the inside of the car is already covered with a bedliner and I still plan on putting dynamat on most of the inside as well. I will most likely either put some dynamat or the orignal padding back behind the platic(attached to it)
Been working on the interior pieces some more. Just cleaning and painting, good ole sem.
Also I found out I screwed myself after boxing in the frame. I needed to fish a couple body mounts threw the newly boxed in section. That took me a few hours with a wire, but I finally got it.
Also I found out I screwed myself after boxing in the frame. I needed to fish a couple body mounts threw the newly boxed in section. That took me a few hours with a wire, but I finally got it.
Looking great!!! LOVE the emerald/hunter green(looks like a color I shot on a regal I had)-question on the "bedliner" you used for the floors/inside? I thought of doing this on my 2 SS builds(being I have an extra gallon and a half from my elco)my question is you said you were planning on laying down some "dynamat"? Will it adhere to the texture? Or do you plan on scoffing down the texture some to lay the mat?I'm going the cheap"peel&seal"route but just had to inquire on the bedliner texture? Thanks,and keep the updates FLOWING!!! :wink:
- Status
Similar threads
