Hello all G-Body enthusiasts! I pulled driver side front door off my '85 Cutlass. Needs to do something to hinges, they're quite loose. Which are proper pin and bushing kit? I searched at Rockauto these: Hinge pin&bushing ? 🤔
Door hinge pin and bushing
- Thread starter jusssi
- Start date
- Status
1986 OLDSMOBILE CUTLASS SUPREME 5.0L 307cid V8 Door Hinge Pin & Bushing Kit | Shop Now at RockAuto
Body & Lamp Assembly Parts and More for Your 1986 OLDSMOBILE CUTLASS SUPREME at Reliably Low Prices. Fast Online Catalog. DIY-Easy. Your Choice of Quality. Full Manufacturer Warranty.
www.rockauto.com
Make sure the holes for the bushings aren’t enlarged/longated. The repair kit won’t do any good if they are. I’ve had to weld the holes up and redrill in the past. On my current Elco project, I used the upper hinge from a Cutlass Cruiser. Works great
For some stupid reason it didn't show under 85 on rock auto, but went to 86 on a Google search.
I bought mine from Ebay since Rockauto's shipping adds a few dollars to this one.
Dorman # 703-264 - Door Hinge Pin and Bushing Kit - Fits OE# 20046147 (ebay.com)
Dorman # 703-264 - Door Hinge Pin and Bushing Kit - Fits OE# 20046147 (ebay.com)
It would be ALOT easier to just get an original 4 door hinge. They’ve had to support a lot less weight. Then put the new bushings in the replacement hinge. The inexpensive hinge tool is a MUST
The door hinge spring compressor also doubles as a spring compressor for a Rev Kit which is what I originally bought mine for.
I also used the leftover pin and bushings to repair the detent roller on my hinge
Door hinge repair | GBodyForum - '78-'88 General Motors A/G-Body Community
I also used the leftover pin and bushings to repair the detent roller on my hinge
Door hinge repair | GBodyForum - '78-'88 General Motors A/G-Body Community
- Status
Similar threads
