Have looked back two years in the Electrical Tech area here I figured I had to ask.
Bases: 1981 ElCamino swap of sweep to round set. Have the lights package with round gauges and changing the center light area to gauges.
Here the problem comes in. I have to hard wire the gauges into the harness as the clips are not there to be used. I have two more wiring harness to use the correct colors but I need to know what color wires go to each of the gauges studs.
I have the grounds set to the fuel gauge and the schematic but not which wire goes to which side of the gauges themselves. I have a picture of the circuit board but that doesn’t help much.
Bases: 1981 ElCamino swap of sweep to round set. Have the lights package with round gauges and changing the center light area to gauges.
Here the problem comes in. I have to hard wire the gauges into the harness as the clips are not there to be used. I have two more wiring harness to use the correct colors but I need to know what color wires go to each of the gauges studs.
I have the grounds set to the fuel gauge and the schematic but not which wire goes to which side of the gauges themselves. I have a picture of the circuit board but that doesn’t help much.
Last edited: