Picked this up from fleabay and got it up on the lift today to get a good look.... may have to adjust my thinking a little....
drivers floor is toast
Pass floor is almost toast
Drivers rear frame horn at bumper is becoming toast
Pass wheel well is through
I changed out the fuel pump, and trying to start, I realized the marker lights were coming on with the ignition switch, and no power to the distributor....
I planned on changing to a 4.3, so the wiring under the hood isn’t much of a problem, and I’m parting a Astro van, so I have all the sheet metal that I need ... just bouncing around thoughts, and any input is appreciated!
drivers floor is toast
Pass floor is almost toast
Drivers rear frame horn at bumper is becoming toast
Pass wheel well is through
I changed out the fuel pump, and trying to start, I realized the marker lights were coming on with the ignition switch, and no power to the distributor....
I planned on changing to a 4.3, so the wiring under the hood isn’t much of a problem, and I’m parting a Astro van, so I have all the sheet metal that I need ... just bouncing around thoughts, and any input is appreciated!
Attachments
-
EC4007E8-1DA0-4D1E-919A-F31D3E86AB3E.jpeg4.2 MB · Views: 275
-
1B2C6237-6460-46BB-ACF0-173B17356959.jpeg2.7 MB · Views: 273
-
078BFF01-256D-4C16-9D7D-53B6F9316995.jpeg3.4 MB · Views: 301
-
41B36260-26AF-4FD9-88D7-4F398C5DEB94.jpeg4.2 MB · Views: 301
-
BB5E4CC2-68ED-43AA-8ED9-42949D7997F1.jpeg2.8 MB · Views: 264