I'm looking for advice on what size jets to be running on my 350. Specs of the motor below:
- 350 bored .010
- 9.2-9.4 Compression
- Eddy RPM Air Gap intake
- Lunati Voodoo 60103 (.227/.233 dur. @ 0.50, .489/.504 lift)
- 1.6 Rockers with 2.02/1.60 valved heads
The carburetor I've been building is a Holley 3310-2, dual feed vac. secondary. Right now the carb has 68 primaries with 75 secondaries. I already have the jet kit from holley and put an electric choke on it from another holley I had on the shelf. Any advice on jet sizes I may need to get me in the ball park for start up is appreciated.
- 350 bored .010
- 9.2-9.4 Compression
- Eddy RPM Air Gap intake
- Lunati Voodoo 60103 (.227/.233 dur. @ 0.50, .489/.504 lift)
- 1.6 Rockers with 2.02/1.60 valved heads
The carburetor I've been building is a Holley 3310-2, dual feed vac. secondary. Right now the carb has 68 primaries with 75 secondaries. I already have the jet kit from holley and put an electric choke on it from another holley I had on the shelf. Any advice on jet sizes I may need to get me in the ball park for start up is appreciated.