hydraulic clutch master install

[bigbadbu]

Hello, i am converting aa automatic trans 79 Malibu to 5 Speed, using a Tremec TKO600, trying to actuate the clutch hydraulicly, cannot find a master cylinder, or a good way to mount one.nobody seems to have any answers on what to buy, location to mount, etc.Help please! i bough the trans kit from Keisler, who has no answers. any help, knowledge, ideas are appreciated!
thanks,
rob

 

[Spams24]

http://www.montecarloss.com/ls1montecar ... ruary.html

Check this out. It may be some help to you.

 

[bigbadbu]

A-G body hydraulic clutch install

Hello,

thanks for the link, there is a wealth of info there, which helped me significantly. thanks again.
rob

 

[carbuf]

I used the master cylinder from an 88 firebird, along with the pedal assembly from the same car. I switch to the hydraulic slave kit from Howe Racing on the other end, the F-body slave sits too close to the header collectors causing the fluid to boil and get spongy pedal. The Tremec doesn't have the twist in the bellhousing like my third gen F-body set-up, so that shouldn't be an issue.

 

[85_SS]

I used 93-97 F-body hydraulics with a JohnB pedal.

 

[pontiacgp]

I switch to the hydraulic slave kit from Howe Racing on the other end, the F-body slave sits too close to the header collectors causing the fluid to boil and get spongy pedal. The Tremec doesn't have the twist in the bellhousing like my third gen F-body set-up, so that shouldn't be an issue.

we had that problem with the headers with our circle track car so we used one of these...

http://www.streetperformance.com/part/h ... 82870.html

 

[carbuf]

I switch to the hydraulic slave kit from Howe Racing on the other end, the F-body slave sits too close to the header collectors causing the fluid to boil and get spongy pedal. The Tremec doesn't have the twist in the bellhousing like my third gen F-body set-up, so that shouldn't be an issue.

we had that problem with the headers with our circle track car so we used one of these...

http://www.streetperformance.com/part/h ... 82870.html

Thats the same set-up I used.... works awesome!