installing moog front coils

[kendl77]

I am planning on installing some new front coil springs on my 81 cutlass...I'm kinda
Cautious because I've heard a lot about coil springs popping out but I don't wanna pay a shop to do it
because it sounds simple...if anybody has any knowledge or have done this before could you tell me what
Is the best approach to tackle the job

 

[Bonnewagon]

Not simple. I've done every job possible on cars and I think front coils are the most dangerous, especially for inexperienced guys. A lot of ways will be posted, and I have my own personal way. I would advise you to research this thoroughly (books and do a search on this site) and remember one thing- use a safety chain to secure the spring to the frame or A-arm just in case it slips and won't hurt you. And as long as you are taking apart a 30 year old car, it probably could use bushings and ball joints too.

 

[86Cutlass383SR]

Yes... wrap a chain around the old spring so it don't chase you across the yard! Also, when installing the new ones. make sure the end of the spring sits in between the 2 small hols in the lower a-arm so it sits level.

http://www.youtube.com/watch?v=c1akqSJE0ss


bumpin1ohm has some good how-to vids on YouTube. Here's one to get you started.

http://www.youtube.com/watch?v=Rbyv8SWUL_A