LQ BU

[kyleBblazercrazy]

I have had this car for a while. It was a 357 sbc 350th setup. My cam failed. So I decided to jump on the band wagon. My buddies camaro turned out real nice , and if he can do it well I can too. Plus he had a few extra parts he couldn't use. I ran across this 27kmi lq4 4l80e combo for decent amount. Including all the accessories and harness and computer. Except the throttle pedal and control module.

 

[kyleBblazercrazy]

I threw on a set of stainless ebay headers, and intake. I picked up a ppp 102mm throttle body. I had to change the alternator , because it hit the tps. Went from 145 amp to 120amp.

 

[kyleBblazercrazy]

I did a complete body off resto on the frame and body.

 

[kyleBblazercrazy]

Before I separated the body and frame. I went ahead and sandblasted the interior and trunk.

 

[kyleBblazercrazy]

Also notched the frame and moved the wheel tubs in 2 inches.

 

[kyleBblazercrazy]

Then lizard skinned the inside and the wheel tubs

 

[kyleBblazercrazy]

Epoxy primerd the interior frame and firewall. Then gloss blacked the frame firewall and underbody

 

[kyleBblazercrazy]

 

[Kansas Bu Wagon]

Damn. Looking good. You going for pro touring style?

 

[kyleBblazercrazy]

Then threw on new energy suspension body mounts and put it back together. before all the paint I cleaned up the factory welds and welded missed places. And added some gussets and bracing to stiffen the frame in the rear.