LQ BU

[kyleBblazercrazy]

Finally received the rest of the fittings and regulator. Got em mounted.

 

[dirtywhiteboy]

Cool project! My wagon needs a M6 setup!
I am on the lookout for something with LS/M6 for a donor car.
I just missed a wrecked Firebird with 78K miles for $500 because my trailer was out on "loan"

 

[kyleBblazercrazy]

Cool project! My wagon needs a M6 setup!
I am on the lookout for something with LS/M6 for a donor car.
I just missed a wrecked Firebird with 78K miles for $500 because my trailer was out on "loan"

Wow. I hate loaning stuff out. There are some you just can't say no to. Very few!

 

[Longroof79]

Lookin' good, man. Nice work! I'll be tuned in on your progress. 😉

 

[kyleBblazercrazy]

Hung some stainless steel pypes under her 2day. Just fitting right now. Seem like they will be a good fit.

 

[kyleBblazercrazy]

 

[kyleBblazercrazy]

Before

After

 

[kyleBblazercrazy]

Installed the ac box and condenser. Cleaned up the compressor. And now trying to locate somewhere to get the correct hoses.

 

[kyleBblazercrazy]

After putting the condenser in with the new mounts. By the way I had to order a cutlass condenser so the hoses would be on the passenger side. I started to put the radiator in. I took it out of the box and bubble wrap and something caught my eye.

So I looked closer. It was a crack. The builders try to weld over it but when they ground the spot the Crack was still there.

 

[kyleBblazercrazy]

I should have learned by now that you get what you pay for but damn. Even this wasn't that cheap. They are going to send me another new one though. Just a minor set back. The fitment of this radiator was great however. And with the grand national upper mount it looks real nice. Thanks to a member on here. I didn't get a pic tthough. Yet!