I installed a Mallory Hyfire VI #685 ignition. I removed the module I was using but retained the magnetic trigger.
When I started the car and checked the timing it was 60 deg. I tried to move the distributor but the vacumm can hit the
heater valve. I was going to reclock the distributor and add some timing by moving the shaft clockwise in relation to the
distributor housing. Can anyone comment on this?
When I started the car and checked the timing it was 60 deg. I tried to move the distributor but the vacumm can hit the
heater valve. I was going to reclock the distributor and add some timing by moving the shaft clockwise in relation to the
distributor housing. Can anyone comment on this?