Mikes Montes Bushing Kit

[MrSony]

Which bushing goes where? Damn kit didn't come with any sort of directions and the fact that my #3 bottom bushings are still loose even though the bolt is tight makes me thing I have them in the wrong places. I know for a fact the two large all rubber bushings to the far right are the "GNX" bushings.
I do not know where the bushings with silver inserts need to be nor when to use the thinner black underside bushings as opposed to the thicker ones. Nor the odd shaped smaller under side bushings.

Any help is appreciated.

 

[pontiacgp]

they all kinda go inbetween the frame and the body except for the rad support.....

did you ask Mikes Montes?

 

[melloelky]

I think the silver ones are for the radiator support

 

[pontiacgp]

I hope that isn't all the bushings you got, if it is you are missing 2. You need 4 smaller ones for the trunk area and 6 larger ones for in front of the C channel, middle of the C channel and one behind it on both sides, and then 2 more for the rad support

 

[superbon54]

The #3 bushings do no use the crush sleeve Or top washer because the cage nuts are a different design. No idea why GM did it that way.

 

[RabbitHoleSS]

At the beginning of the video he shows the directions.

 

[MrSony]

At the beginning of the video he shows the directions.

thats for the engery suspension kit

I got the mikes kit.

 

[MrSony]

I don't think this kit has core support bushings.

 

[pontiacgp]

did you ask Mike?

 

[MrSony]

did you ask Mike?

tried calling. was busy. its 10:30 there, their hours are 9-4. i have found it does not come with rad bushing. thats a separate part. dumb.

edit: email has been sent