From looking at the KinDigit you still use cables but it sits in or on a plate mounted on the frame. But still pulls on the cables with only a button in the vehicle.
BUILD THREAD Seem like forever
- Thread starter Starrjkd
- Start date
Wow! They are a wide unit. Like Superbon54 , I wondered would a frame notch but do you want to pull everything back off to do it?
these particular EPB goes in almost the full width of the frame you would have to cut a notch for clearance when the axle bottom out. I do have the notching panels from UMI was going to do that project in the future . I could cut a notch when I decide to tackle that job.
Form and function being displayed very well. Both are difficult, but together requires a tremendous amount of effort and knowledge.
Your build would be an excellent candidate for a tube core support. From looking at everything else, I'm surprised you don’t have one.
Your build would be an excellent candidate for a tube core support. From looking at everything else, I'm surprised you don’t have one.
I seen them and contemplated on purchasing one but the one I have is real clean and refinished already. So I decided to keep the one I have.
