BUILD THREAD “The Juggernaut”

[Longroof79]

Count me in, D. I appreciate the workmanship on the 'naut, and of course will enjoy following your Olds Cool project. 😀 Let 'er rip.

 

[olds307 and 403]

Fire up the build thread for sure Donovan! I too think "Olds Cool" is a sweet build, and usual you put some subtle touches on it to separate it from the pack.
Yeah its a 350 swapped olds, but the attention to detail makes it different.

A thread would be neat and yes there are million sbc swapped Cutlass out there, almost all are orange with chrome. I am seriously considering making the Olds 350 going in, looking close to stock on my 70 S, gold paint, Performer 350 ground off the intake etc. I am even adding the factory Rocket 350 pie plate decal to the Spectre dual snorkel ram air cleaner.

 

[oldtinsmith]

YES!!! Please do!

Doug

 

[Injectedcutty]

A thread would be neat and yes there are million sbc swapped Cutlass out there, almost all are orange with chrome. I am seriously considering making the Olds 350 going in, looking close to stock on my 70 S, gold paint, Performer 350 ground off the intake etc. I am even adding the factory Rocket 350 pie plate decal to the Spectre dual snorkel ram air cleaner.

Sorry Donovan in advance......yes when i first swapped my 87 to 350sbc power it was orange with shiney....but then i realized i wanted it to look way different so this is what my 355 transformed to.

 

[Rktpwrd]

Okay guys, thanks for the feedback. I don't mind doing one up, but didn't necessarily see the point of there wasn't much interest in it. Apparently the popular opinion is "yes", so I'll get on it here in the next day or two.

Thanks to everyone that replied!

D.

 

[Injectedcutty]

Okay guys, thanks for the feedback. I don't mind doing one up, but didn't necessarily see the point of there wasn't much interest in it. Apparently the popular opinion is "yes", so I'll get on it here in the next day or two.

Thanks to everyone that replied!

D.

Snap snap D....we will be anxiously waiting! 😀

 

[Rktpwrd]

Punch it!

Two finer words in the car guy lingo were never spoken...
😀

 

[bbarbulo]

I'd be interested in Olds Cool as well... in case it wasn't universally understood that we appreciate the work AND the journals that document said work

 

[theoldsone]

Going to sit down tonight on the Cp and look through this thread. And hopefully I can put some time into the rendering.

 

[Rktpwrd]

Going to sit down tonight on the Cp and look through this thread. And hopefully I can put some time into the rendering.

That would be great if you could swing it. Thanks again!

If you need anything or have any questions, just shout. I'd be happy to answer them for ya.

And as stated before, my offer to compensate you for your time still stands if you're interested....

Donovan