What did you do to your non-G Body project today [2024 edition]

[Built6spdMCSS]

I feel for you all dealing with the freeze. It got down to 25 a couple nights. Broke both manifolds front and rear. Got a nice cold shower turning off the rear one that goes to the drip irrigation.

Yesterday morning at the low was 19 with a real feel of 10. Any standing water outside is ice. Not too common here.

 

[Ugly1]

I guess the pipes were frozen. Warmed up to about ~20 today and water is back. Odd that the washer was the only thing affected.

Could have just enough draft around it to give you grief.

 

[Ugly1]

Yesterday morning at the low was 19 with a real feel of 10. Any standing water outside is ice. Not too common here.

Just a reminder why you like to live down south, it’s a short term thing. Not good for the crops though.

 

[Built6spdMCSS]

Yup, anything sensitive that I could move in my sunroom has been there for a few weeks. Saturday the high is 45, I've got an oil change to do so hopefully the sun is out.

 

[78Delta88]

Used to Chicago area before move to southwest, not missing the cold, but no yards around here have grass. Kind of depressing at times.

 

[Built6spdMCSS]

If you want warm and used to no grass, there's always Kuwait or Qatar. 🤣

 

[78Delta88]

Been to both. Only thing good about Qatar was the day on the wave runner.

 

[Built6spdMCSS]

We got stuck on Al Udied for 10 days, it was built up then so that helped. End of June so you didn't go outside from 0900-1800.

 

[86LK]

bought a tow-yard auction truck ('07 SIlverado) the other day so been getting it ready to roll.

-battery dead: replaced (and the stereo starts playing mexican music as soon as it got power 🙄)
-checked oil: black gold, sludge on the dipstick, and a quart low! (but no milkshake)
-radiator: over flow empty , poured a gallon in (sucked it all down)
-20" front tires: off the rim so got used pull-offs at Discount Tire (got 4 excellent tires for $20/ea with 9/32 left, $175 out the door with mount/balance! those tires are $190 each!)

started it up....no CEL or nothing. OBD code reader has 4 codes (3 ABS, 1 BCM)

 

[78Delta88]

Watched the Tucson auction, nothing to purchase.

Finalized final primer and wet sand with 800 grit, masked and ready to do the black.