What do you think of how I mounted my regulator?

[Bobbystill]

How about something like this? Should I worry about clearance on the coil? Need two more 90 degree fittings to make this work.

Don’t mind the green and black wiring mess in there. Not gonna stay like that..


Sent from my iPhone using Tapatalk

 

[Injectedcutty]

How about something like this? Should I worry about clearance on the coil? Need two more 90 degree fittings to make this work.

Don’t mind the green and black wiring mess in there. Not gonna stay like that..


Sent from my iPhone using Tapatalk

That's a little better. Here is how I mounted mine when running the old 355 setup. I made an L bracket that bolted to the head, then bolted to the regulator. I built the lines to have enough flex.

Also, those fittings look similar to PTFE style with the brass olive and the braided PTFE line tends to be a little smaller on the OD.

 

[bracketchev1221]

I would leave it right on the fenderwell. Regulators don't do as well when having to deal with engine shaking and vibrations.

 

[pontiacgp]

I would leave it right on the fenderwell. Regulators don't do as well when having to deal with engine shaking and vibrations.

I never considered that....🤔