Question for the diff specialists:
Gm 7.5" Rear diff with a 10 bolt cover.
New ring and pinion, pinion backlash is at 0.010 inch, got the right pinon (15 inch/lbs) and carrier preload.
Pinion has the standard shim which is 0.35"
Backlash Is a tad loose and needs to be a little tighter with another shim, most important for me right now is the gear pattern.
I think i am real close, on the other hand there are people who do this for a living and i am sure they can give me some advice or at least point me in the right direction.
Gm 7.5" Rear diff with a 10 bolt cover.
New ring and pinion, pinion backlash is at 0.010 inch, got the right pinon (15 inch/lbs) and carrier preload.
Pinion has the standard shim which is 0.35"
Backlash Is a tad loose and needs to be a little tighter with another shim, most important for me right now is the gear pattern.
I think i am real close, on the other hand there are people who do this for a living and i am sure they can give me some advice or at least point me in the right direction.