hood clearance

[scarborough]

i have 87 olds with 455 upgrade with a edelbrock 750 on an performer intake i have hood clearance problem looking for a drop fliter set up . and if i need to change motor mount i think motor mount are off of a 307

 

[pagrunt]

Are you using a spacer/thick gasket under carb?

 

[melloelky]

try the drop base cleaner first as it's rather cheap and easier than the motor mount experiment.see what happens.

 

[fleming442]

Yes

 

[85442/86buick]

Scarborough ,
First post in almost 2 years , not sure about your poll ............a drop air filter would be the easiest to try. but are you talking about a half inch or ??? to close the hood

from the south coast of Scarborough

 

[scarborough]

Are you using a spacer/thick gasket under carb?

Are you using a spacer/thick gasket under carb?

no

 

[scarborough]

try the drop base cleaner first as it's rather cheap and easier than the motor mount experiment.see what happens.

thanks

 

[scarborough]

Scarborough ,
First post in almost 2 years , not sure about your poll ............a drop air filter would be the easiest to try. but are you talking about a half inch or ??? to close the hood

from the south coast of Scarborough

 

[scarborough]

about 2 1/2 in.

 

[Wageslave]

Something like this would probably give you the clearance you need.

https://shop.advanceautoparts.com/p...oFDEIoTnIQRDat-ZzdEaAi7NEALw_wcB&gclsrc=aw.ds

This one is a little (lot) pricey, but there are other ones in this style that are a lot cheaper.