Hood struts for a fiberglass cowl

[Injectedcutty]

only issue is regal hinges have the lower strut mount stud located on the inner fender. The other G's don't have that provision.
I modifed regal hinges and used Stabilus #4062 struts. I now have custom stainless struts, but the 4062's will work. You need a strut with 120lbs of force if it has the steel inner frame.

 

[jwood1213]

only issue is regal hinges have the lower strut mount stud located on the inner fender. The other G's don't have that provision.
I modifed regal hinges and used Stabilus #4062 struts. I now have custom stainless struts, but the 4062's will work. You need a strut with 120lbs of force if it has the steel inner frame. View attachment 161835 View attachment 161836 View attachment 161837

Looks clean, thanks. What specifically did you modify?

 

[Injectedcutty]

Looks clean, thanks. What specifically did you modify?

The regal hinges have a separate mount for the upper strut location. It mounts on the hood, about 2" further up from the hood hinge itself.
My brother n law and I measured and measured, then welded the upper strut mount directly to the hinge body. Basically using the front hinge mount hole for the strut side as well. Keeps it compact.

 

[scoti]

The regal hinges have a separate mount for the upper strut location. It mounts on the hood, about 2" further up from the hood hinge itself.
My brother n law and I measured and measured, then welded the upper strut mount directly to the hinge body. Basically using the front hinge mount hole for the strut side as well. Keeps it compact.

I gotta' ask.... Where did you source the SS strut? That's a nice upgrade.

 

[Injectedcutty]

I gotta' ask.... Where did you source the SS strut? That's a nice upgrade.

Secret

 

[Streetbu]

Secret

Struts-R-Us.... 🤣

 

[Injectedcutty]

Struts-R-Us.... 🤣

The regular struts came from liftsupportsdepot.com the SS ones were custom spec'd

 

[jwood1213]

The regular struts came from liftsupportsdepot.com the SS ones were custom spec'd

Do I buy struts for the monte, or for an 87 regal since I’m switching to regal hinges?

 

[81Regal]

Regal

 

[jwood1213]

Regal

Do you recommend a specific length or is it personal preference