Recent content by 84H/O

Awesome, the stopper stud did look a little tweaked. I'll give that a shot, thanks!

What is it that causes the bucket seats to lean in towards the center console. Is it in the seat base (power driver side here) or in the frame work of the seat itself? Really only my driver side has the lean to it. Could that be adjusted out with the bolts that hold the seat to the power track?

Excellent, thank you!

Yes, it's has a hose nipple, though it doesn't appear it's ever had anything hooked up to it

What is the screen element inside the air filter for? Also this, found behind the ecm kick panel.

Well, I got it figured out, there was a burnt out piece on the circuit board in the module. I soldered that back up and it all works now. Thanks for the help!

Wire nuts are temporary, grey wire nut is covering the end of the rke module tan wire, blue wire nut is on the wire that runs to the driver door, red butt connector is on the wire that goes to the relay (clipped that to test a couple things). In the configuration as pictured, locking works, and...

Pontiac455, just the maliburacing one said he didn't use the tan wire from the rke module, but he acknowledges that you could. Westbank, yes that's what I'm trying to get it to do, first fob press for driver door, second press for passenger. Initially I may have, but I double checked and made...

I don't think the module is bad, I can hear it click when I hit the unlock button the first time, continuity in the wire is good, but I'm not getting any power spike out of it. Correct me if I'm wrong but didn't these unlock just the driver side on the first press of the button?

I'm using a module and remote from a 98 Monte Carlo, as used in the threads linked in my op

I've just tried wrapping up the remote keyless entry install as described here: http://www.montecarloss.com/community/ubbthreads.php?ubb=showflat&Number=975483&page=1 here: http://www.maliburacing.com/forum/viewtopic.php?f=27&t=121855 and here: https://gbodyforum.com/threads/keyless-entry.51076/...

Installed the new window felts, and re felted the guides. It has helped but has not completely solved the problem.

My tracks and rollers are pretty clean at this point as I have gone over them. Felts are available on gbodyparts.com

I know I have to replace it, but they aren't that bad honestly.. The passenger side is in the same shape as the driver side. What else tends to fall out of whack in these window systems?

On my 84 Hurst I have an issue with the drivers side power window. It rolls up nice, smooth and quick. When you roll it down, it kind of bounces/chatters. I've searched around and have lubed up all the tracks and adjusted the felt pads. This hasn't fixed the issue, any input on this? What's my...