200-4R aftermarket pan

[postalrm88]

anybody know where i can get a cast aftermarket pan for a 200-4R trans my pan has a leak that keep coming back ive alreaddy took it apart cleaned and sealed in a few times and it just keep leaking nothing to bad just around the bolt and a little around some of the edges and it just geeting anoying and making a mess on the floor if i let the car sit and dont drive it.any help would be great

 

[85GPLef41]

here is one:
http://www.transmissioncenter.net/200-4r.htm

 

[beermonkey9417]

if ya take the pan off and look where the bolt holes are sometimes they get dished, so what yo can do for the price of a new gasket and some sealer and your time is take the pan off and flatten the bolt hole so there flush with the rest of the pan seal, then put some gasket sealer on the pan and let it sit till it gets tacky, then put the gasket on and put more gasket sealer on the gasket and let that get tacky, then bolt it on and let it cure over night. the filler up and go. it may seem like alot of work but itll save ya the cost of a new pan. good luck